Rooflight 70x50 (700x500 mm)
VisionStar L
- Double tinted polycarbonate dome
- Optional continuous ventilation, infinitely adjustable up to 55°.
- 105 mm flat, comfortable one-hand operation
Rooflights 40x40 (400x400 mm)
VisionStar M
- Double tinted polycarbonate dome
- Optional continuous ventilation, infinitely adjustable up to 50°
- 80 mm flat, comfortable one-hand operation
Modell 42
- Small, space-saving polypropylene milk glass dome
- Telescopic display unit, tiltable on four sides, with locking device
- Optionally with double roller blind combination frame (470 x 470 x 14 mm), folding net frame with or without blackout roller blind or pleated frame
Modell 46
- Milk glass dome made of polypropylene with large overhang
- with snow and splash guard edge
- Telescopic display unit, tiltable on four sides, with locking device
Modell 4600
- Transparent polypropylene dome with large overhang
- with snow and splash guard edge
- Telescopic display unit, tiltable on four sides, with locking device
Rooflights 28x28 (280x280 mm)
VisionVent S pro
- Large polycarbonate outer dome for rain protection
- High UV protection due to tinted dome material
- Telescopic display, tiltable on four sides, with locking device
- Comfortable double pleated blind
VisionVent S eco
- Large polycarbonate outer dome for rain protection
- High UV protection due to tinted dome material
- Telescopic display, tiltable on four sides, with locking device
- Folding frame with mosquito net, roller blind optional
Modell 29
- Small, space-saving polypropylene milk glass dome
- Telescopic display unit, tiltable on four sides, with locking device
- Folding frame with mosquito net, roller blind optional
Rooflight 32x36 (320x360 mm)
Modell 32
- small, space-saving polypropylene milk glass dome
- Inner dome with continuous ventilation
- Telescopic display, tiltable on four sides, with locking device
Frequently asked questions about our rooflights
Roof hatches provide comfortable light, fresh air and a pleasant indoor climate in motorhomes and caravans, even when the windows and doors are otherwise closed. With the right roof hatches, UV radiation, noise and dirt stay outside. A rooflight is also particularly useful in the bathroom area of your camper.
Permanent ventilation by means of a rooflight ensures a minimum level of ventilation in the vehicle and prevents dangerous CO2 concentrations. We offer our VisionStar model with and without permanent ventilation. By installing a seal, it is also possible to close it later. In this case, please contact your vehicle manufacturer before installing the seal. We offer all other models exclusively with non-closable permanent ventilation.
All other models are offered by us exclusively with non-closable permanent ventilation.
We strongly advise against closing an existing permanent ventilation system, as a minimum ventilation level in the vehicle must not be fallen short of in order to prevent dangerous CO2 concentrations.
The costs for the installation of a rooflight always depend on the specific installation situation. Please contact the specialist company of your confidence.
For you as an end user, it is unfortunately not possible to purchase complete roof hoods, as well as replacement hoods directly from us. For this, please contact a dealer of your confidence references / our partners. You can also request accessories and spare parts for your MPK roof hood directly from us. We will be glad to help you. All available spare parts can be found in our spare parts catalog. To the downloads.
You can download the installation and operating instructions from our website. To the downloads.
The approval number (E13*43R*) is stamped either on the side of the outer dome or on the inner dome (VisionStar). You will find the required operating permit for download on our website. To the downloads.
We recommend a maximum speed of 160km/h for the VisionStar and VisionVent models, and 130km/h for all other models. Make sure that the rooflights are always fitted with the hinges or the hinges facing in the direction of travel and make sure that they are closed and locked before driving off.
Screws and sealant are not included in the scope of delivery, as the length of the screws and the sealant to be used depend on the respective installation situation. Information on this can be found in the installation and operating instructions. To the downloads.
Our rooflights for the cut-out dimensions 40x40 (400x400 mm) and 28x28 (280x280 mm) are basically interchangeable. Replacement domes can be easily attached to an existing outer frame of the corresponding size thanks to this modular system.
Thanks to the modular system, you can exchange and retrofit our interior frames for the cut-out dimensions 40x40 (400x400 mm) and 28x28 (280x280 mm) as you wish
Simply clean the frames and domes of the MPK rooflights with warm water and a soft cloth. Please only vacuum/dust pleated blinds, nets etc. carefully. For particularly intensive cleaning, you can also simply dismantle the inner frames and domes and clean them in a large container of water - please read the operating instructions. Be careful with cleaning agents, they can damage the plastic!